Fire tube steam generators

FIRE TUBE STEAM GENERATORS TWO TURNS

SIMATIC 2 GF

Of the type with two rounds of smoke, dry bottom, of simple and robust construction, ideal for medium-power applications in which the simplicity of construction, combined with the simplicity of maintenance, and reliability assume a predominant aspect.

In addition to the above, the generators are distinguished by the following advantages:

• High efficiency excluding economiser (90%), thanks to the complete exploitation of the exchange surface of the passing furnace.
• Easy maintenance (ordinary and extraordinary) due to the accessibility of the tube plates through the front and rear opening doors.
• Low Nox emissions, thanks to a low heat load (less than 1 MW) and the absence of flame inversion in the combustion chamber which sizes falls within the parameters between length and diameter that allow the right speed and permanence of the fumes in the room.

Furthermore, it is possible to equip the generator with a feeding water economiser able to increase the efficiency, and the instrumentation necessary to have the exemption of the continuous presence of the stoker for 72 hours.

FIRE TUBE STEAM GENERATORS WITH THREE TURNS OF SMOKE WET BOTTOM

SIMATIC 3 GF

Boiler type with a large volume of water, 3 turns of smoke with rear chamber totally wet from the water, transportable monobloc execution, fully automatic.

All our steam generators model SIMATIC 3 GF wet bottom (rear chamber completely wet from the water with consequent increase of exchange surface), are equipped with corrugated fireside type FOX and edge plates able to absorb the expansion of the boiler body, (no welded at an angle).

In addition to the above, the generators are distinguished by the following advantages:

• High efficiency without economizer (90%), thanks to the complete exploitation of the exchange surface.
• Easy maintenance (ordinary and extraordinary), due to the accessibility of the tube plates through the front and rear opening doors.
• Low Nox emissions, thanks to a low heat load (less than 1 MW) to the absence of flame inversion in the combustion chamber and to the sizing of the same that falls within the parameters between length and diameter that allow the right speed and permanence of the fumes in the room.

Furthermore, it is possible to equip the generator with a feeding water economiser able to increase the efficiency, and the instrumentation necessary to have the exemption of the continuous presence of the stoker for 72 hours.